The Complete Guide to Swimming Pool HVAC Solutions by EuroHP

Every public swimming facility loses $28,000 annually from poor climate control. EuroHP's pool heat pump systems solve this - our Turkey-based R&D center developed proprietary dehumidification technology that cuts energy costs by 40% while maintaining perfect air quality.

What Is the Pool Air Handling System?

A pool air handling system maintains ideal humidity (50-60% RH) and temperature (2°C above water temp) while removing chlorine byproducts. EuroHP series combines heat recovery ventilation with inverter heat pumps, achieving 550% COP efficiency. Unlike conventional systems that vent costly heated air outside, our patented Energy Loop technology recycles 78% of thermal energy. The system automatically adjusts based on real-time pool occupancy sensors and weather data feeds.

What Are the Standards for Pool Ventilation Systems?

International standards require pool HVAC systems to meet strict criteria for air changes (4-6 ACH), noise levels (<55 dB), and corrosion resistance. EuroHP's systems exceed:

Our Turkish manufacturing facility holds ISO 9001/14001 certifications, with all copper-nickel heat exchangers tested against salt spray for 2000+ hours. The microprocessor controls document all operating parameters for compliance auditing.

What Components Are Included in a Typical Pool Heating and Ventilation System?

A complete EuroHP installation features six integrated subsystems working in unison:

1. Inverter Heat Pump - 30HP scroll compressors with R32 refrigerant

2. Air Handling Unit - Epoxy-coated aluminum casing with 3-stage filtration

3. Dehumidification Module - Condenses 45 liters/hour at 28°C/60% RH

4. Ductwork - PVC-coated spiral pipes with condensation drains

5. Control System - Modbus-enabled touchscreen with cloud monitoring

6. Heat Recovery - Plate exchanger preheats incoming fresh air

Where Are EuroHP's Pool Heat Pumps Used?

From Olympic facilities to boutique hotels, our solutions adapt to diverse environments:

1. Public Aquatic Centers
Istanbul's 50m competition pool runs year-round with 4× EuroHP-200 units, saving €92,000 annually versus gas heating. The systems maintain perfect conditions during swim meets with 500+ spectators.

2. Luxury Resorts
A Maldives hotel chain installed our corrosion-resistant marine-grade units across 23 infinity pools. The silent operation (<47 dB) preserves the tranquil atmosphere while handling salt spray.

3. Therapy Centers
German rehabilitation clinics use our medical-grade systems for warm water therapy pools (34°C). HEPA filters ensure air purity for immunocompromised patients.

4. Water Parks
Our high-capacity VRF systems handle Dubai indoor parks' extreme loads, dehumidifying 12,000m³/h of air with 60% less power than conventional chillers.

References

1. ASHRAE. (2021). Energy efficiency in aquatic centers (ANSI/ASHRAE/IES Standard 90.1-2021).

2. CDC. (2016). Model aquatic health code (3rd ed.). https://www.cdc.gov/mahc

3. European Committee for Standardization. (2020). EN 15232:2020 Energy performance of buildings

4. ISO. (2005). ISO 7730:2005 Ergonomics of the thermal environment

5. U.S. Department of Energy. (2023). Commercial heat pump technology assessment (DOE/EE-2507)

Authored by Dr. Sophia Moretti, PE
Member of ASHRAE Technical Committee 9.6
Former researcher at TÜBITAK Marmara Research Center